Product Care
100% Tung Oil Application
For a good tung oil finish we suggest looking for dry spots 1-2 hours after first application and apply additional oil to these areas. Allow the first application to soak for 5-6 hours or overnight.. Using a clean dry rag* or old T-shirt* rub the surface to remove any pooled oil. For the first week check the surface daily and apply tung oil as needed. Weekly applications for six weeks to follow, monthly for the first year, and annually thereafter.
Remember to monitor and apply oil as needed especially around areas where water exposure is present
(ie. sink and dishwasher).
*Oil soaked rags have a chance for combustion. Disposal statements can be found on the product container provided at time of install. Material Safety Data Sheet (MSDS) PDF is also added to this page for your reference.
​
JLConley Signature Wood Conditioner
Dab a small amount of wood conditioner with clean lint free cloth* or old tee shirt rub the direction of the wood grain being sure to cover all surfaces of the piece allow to absorb for 1 hour
wipe off any excess
Note: For the longevity of your wooden product a monthly application is suggested or when dry areas are observed.
*Oil soaked rags have a chance for combustion.
​